
Bedding: (S) ( Concrete):
When the excavation is level, lay the concrete bedding for the pool.
The bedding must measure 1015x570 cm (PEOV9159, PEOV9127), 900x500 cm (PEOV8059, PEOV8027), 800x420 cm
(PEOV7059, PEOV7027), 700x420 cm (PEOV6059, PEOV6027), 600x400 cm (PEOV5059, PEOV5027), 650x650 cm
(PE5559, PE5527), 520x520 cm (PE4259, PE4227), 450x450 cm (PE3559, PE3527), with a height of 15 cm and be made
of 350 kg/m3 concrete with 15 x 15 x 8 welded-wire mesh.
CAUTION:
Check that the surface is perfectly level and smooth. Any imperfection in the bedding will be visible when the pool is filled with
water.
CAUTION: Wait 2 days for the concrete to set before continuing with the installation.
Location of the retaining walls (M) for the straight section: Only for oval pools.
Mark the exact location of the pool on the bedding with chalk or lime.
Check the location of the walls and their sizes. Check the diagonals of the walls to make sure that the pool is perfectly in
square.
Round pool: the wall will be installed when the pool is full of water ( see page 26 ).
2
(S)
(M)
230 cm
230 cm
470 cm
PEOV9159
PEOV9127
3 cm
50 cm
20 cm
20 cm
460 cm
(S)
(M)
200 cm
200 cm
406 cm
PEOV8059
PEOV8027
3 cm
50 cm
20 cm
20 cm
400 cm
(S)
(M)
160 cm
160 cm
326 cm
PEOV7059
PEOV7027
3 cm
50 cm
20 cm
20 cm
380 cm
Tool necessary
(not included)
Nødvendigt værktøj (medfølger ikke)
Tarvittavat työkalut (ei mukana)
Nødvendige verktøy (medfølger ikke)
Verktyg behövs (ingår ej)
DK
Underlag: (S) (beton):
Når udgravningen er nivelleret, skal betonunderlaget støbes.
Underlaget skal måle 1015 x 570 cm (PEOV9159, PEOV9127), 900 x 500 cm (PEOV8059, PEOV8027), 800 x 420 cm (PEOV7059,
PEOV7027), 700 x 420 cm (PEOV6059, PEOV6027), 600 x 400 cm (PEOV5059, PEOV5027), 650 x 650 cm (PE5559, PE5527),
520 x 520 cm (PE4259, PE4227), 450 x 450 cm (PE3559, PE3527), have en højde på 15 cm og være lavet af beton på 350 kg/m3
med svejset trådnet på 15 x 15 x 8.
FORSIGTIG:
Kontroller, at overfladen er helt jævn og glat. Enhver ujævnhed i underlaget vil være synlig, når poolen er fyldt med vand.
FORSIGTIG: Lad betonen tørre i 2 dage, før du fortsætter med installationen.
Placering af støttemure (M) til den lige strækning: Kun for ovale pools.
Markér poolens nøjagtige placering på underlaget med kridt eller kalk.
Kontrollér placeringen af væggene og deres størrelser. Kontrollér væggenes diagonaler for at sikre, at swimmingpoolen er fulds-
tændig retvinklet.
Rund pool: Væggen vil blive installeret, når poolen er fuld af vand ( se side 26 ).