![background image](http://html1.mh-extra.com/html/gravograph/l-solution-100-ex-fibre/l-solution-100-ex-fibre_user-manual_2258787030.webp)
L-SOLUTION 100 Ex Fibre machine
. 30
First contact
Driver controls
The Printer Driver for Windows® (driver for short) has the appearance of other Windows® printer drivers
(pict. 1)
. A thorough understanding of how Windows® operates is essential to operating the driver’s controls. Please
refer to your Windows® manual or online help screen on how to install, operate, and troubleshoot Windows®.
All the illustrations of the driver were realized with Windows 7®.
About of tab
This «About of» tab
(pict. 1)
is controlled by Windows® and is present in all Windows® Drivers. For information on how
to use the controls located in this tab, please refer to your Windows® manual or online help screens.
The “?” in the top right corner of every tab takes you to the driver's online help screens.
2 -
Start the test file on the machine
13 lines (numbered from 0 to 12) of vertical lines are then engraved :
Printer driver
By clicking on the photo of the machine it is possible to (pict.
1) :
- to load a new version of the machine program
- choose a storage folder (pict. 1):
-
for your engraving job files (JOB) : ("Presets Path"
)
- to send an engraving test file to adjust your LASER alignment (pict. 2) :
1 -
Adjust the power of your laser based on the material used for engraving the
test file.