![background image](http://html1.mh-extra.com/html/gravograph/l-solution-100-ex-fibre/l-solution-100-ex-fibre_user-manual_2258787029.webp)
First contact
L-SOLUTION 100 Ex Fibre machine
. 29
Make the L-SOLUTION 100Ex Fibre machine ready to engrave
1. Check that your computer has the minimum required configuration :
Printer driver
2. In every case install the Gravograph L-SOLUTION driver.
See "Make a Gravograph LASER machine ready to engrave" in the appendice "Gravograph
Machines - Soft Setup".
3. Make the machine ready to engrave with the program used to produce engraving :
3a. Either you LaserStyle 5 Gravograph software (GravoStyle range), then :
-
Install the GT Smartstream 3.xx driver for the data exchange between LaserStyle
and the LASER engaving machine Laser.
-
Then, install the LaserStyle engraving software on the PC.
See the chapter "Make a Gravograph LASER machine ready to engrave with LaserStyle" in
the appendice "Gravograph Machines - Soft Setup".
Then enable your L-SOLUTION 100Ex Fibre LASER machine in LaserStyle engraving
program.
3b. Or you use a graphical editor and as the Gravograph L-SOLUTION Driver is already installed,
then :
-
You just need to select the "Print..." function (as for a printer) to transfer the
sengraving job to the L-SOLUTION machine.
See the chapter "Make a Gravograph LASER machine ready to engrave with a graphical
editor" in the appendice "Gravograph Machines - Soft Setup".
Compatible with Windows 7® and :