Gravograph Machines - Soft setup
Updating additional machine firmware
When the driver that matches the additional machine has been already set up on PC check its
compatibility with this machine firmware.
1.
Run MajFirmware.exe tool.
2. Check
Number parameter. When value is
• a number: firmware and driver are compatible.
Cancel
Close dialog.
• "Unknown": firmware and driver are not compatible. Update firmware.
a.
Update
Click opposite Firmware parameter.
b. Double-click the file that will update firmware:
rotary only
.\Firmware\UC_Sirius\vp_prog.dos
rotary or
laser
.\Firmware\UC_K2000\vp_prog.dos
c.
Send file to machine
Click to send the file. Machine beeps when operation is over.
d.
Exit
Click.
Differentiating two same named-machines
The additional machine has the name of a machine formerly set up.
1.
Run MajFirmware.exe tool.
2.
Update
Click opposite Number parameter: type a different number for each additional
machine.
0 value remains the number of the first machine set up.
3.
Exit
Click.
January 8, 2009
12
