![background image](http://html1.mh-extra.com/html/gravograph/l-solution-100-ex-fibre/l-solution-100-ex-fibre_user-manual_2258787013.webp)
First contact
L-SOLUTION 100 Ex Fibre machine
. 13
Description
The L-SOLUTION 100 Ex Fibre machine is a LASER engraving machine.
It has a control panel with a L.C.D. screen connected to the software in the machine.
Files to be engraved are transferred from the computer to the machine via a cable which is plugged into one of the two
ports on the L-SOLUTION 100 Ex Fibre machine.
The actual engraving process is controlled by a fiber LASER source.
The object to be engraved is placed on a table (as standard) or held by any other system recommended by GRAVOGRAPH
(consult your GRAVOGRAPH dealer for more information on systems available).
The L-SOLUTION 100 Ex Fibre machine has a maximum engraving surface area of 24" x 12"
(610 x 305 mm).
The L-SOLUTION 100 Ex Fibre LASER engraving machine is a high performance machine:
All safety instructions must be complied with.
Front view of the machine
LASER engraving machine
H. Base
K.
Engraving table
L.
Main stop button
B.
Control panel
B1. L.C.D. screen
B2. 15-key control keyboard
B3. 1 indicator light (red or green)
M.
Air-assist adjustment button
J1.
Head
J2.
Thread columns for the rise-lower moving
J3.
Graduated X-ruler
J4.
Graduated Y-ruler
J5.
X-Rail protection
J6.
Y-Rails protection
J7.
Lamp
N9. Cylinder attachment connection (optional accessory)
The machine must always be switched off before connecting or
disconnecting a cable or the cylinder attachment (optional accessory),
as indicated on label
Description