First contact
L-SOLUTION 100 Ex Fibre machine
. 23
Setting up transmission between the L-SOLUTION 100 Ex Fibre
and a PC type computer
The computer and the L-SOLUTION 100 Ex Fibre machine must be switched OFF.
PC computers and the WINDOWS® graphic environment being very widespread throughout
the world, we have based ourselves on these products to define the installation and use
procedures of the L-SOLUTION 100 Ex Fibre.
If your equipment is not compatible and you encounter problems when installing or using the product, contact your
Gravograph agent.
Connection cables
• Use Gravograph connection cables (please refer to your Gravograph vendor for a list of products available).
These cables are suited for the machines that are to be connected to.
They comply with the CEM radio waves standards and protect from external electric "attacks" (compliant with CEM
immunity and sensitivity standards).
• Do not use cables which are too long. Keep the machines as close as possible and use as short a cable as possible.
• Separate the mains cable and the transmission cable (avoid connecting the transmission and mains cables to the same
socket, etc ...).
Follow the connection procedure depending on the transmission cable supplied with the
L-SOLUTION 100 Ex Fibre machine.
The machine is delivered with the two following cables :
• USB cable (F1)
• Parallel cable (F2) (with a 26-pin Mini-Delta Ribbon connector)
Installation