GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved! No liability for printing errors. Id.-No. 0062205 06/2011
6
Note: The CFRP stiffeners (48) are only required for 3-D aerobatics. They can be
fitted at any time if you think they are necessary, even after you have completed the
model.
The undercarriage
The illustration shows the tailwheel assembly components. The first step is to slip the
wire tailwheel unit (28) into the bracket (29), then bend it at the correct angle using a
pair of flat-nose pliers. Push the bush (34) into the tailwheel (31), fit both on the axle
followed by the collet (33) on the outside, then clamp the bush with a grubscrew (32).
Use a balsa knife to cut a slot in the rudder to accept the steering lug (30). Slip the
steering lug (30) onto the steering arm, glue the lug in the slot in the rudder, then
glue the tailwheel bracket (29) to the fuselage. Do not use activator spray for this.
