GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved! No liability for printing errors. Id.-No. 0062205 06/2011
4
The illustration shows the components of the battery compartment cover (14) and the
tailplane (17). Please note that the elevator horn (19) is not glued in place until later.
There are two methods of cutting the elevator free: the normal option is to open up
the slot forward; however, the version shown by the dotted line produces a stronger
tailplane and better damped elevator response. When gluing the reinforcement (18)
in place ensure that no glue gets onto the hinge line. If necessary, the spring power
of the retaining clips (15) can be reduced by opening the jaws slightly.
Here we see the elevator servo prepared for installation; secure the extension lead
connector with a drop of glue. Set the servo to neutral (centre) from the transmitter,
and fit the cut-down output arm (included with the DES 476 BB) as shown.
