background image

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY 

Modifications reserved! No liability for printing errors.   Id.-No. 0062205    06/2011 
                                                          

 

16

 

 

Environmental Protection Notes 

 
 

This  symbol  on  a  product,  in  the  user  instructions  or  the  packaging,  in-
dicates that you must not dispose of that item, or the electronic components 
it contains, in the ordinary domestic waste when the product comes to the 
end  of  its  useful  life.  The  correct  method  of  disposal  is  to  take  it  to  your 
local collection point for recycling electrical and electronic equipment. 

 
Individual  markings  indicate  which  materials  can  be  recycled  and  re-used.  You  can 
make  an  important  contribution  to  the  protection  of  our  shared  environment  by  re-
using  the  product,  recycling  the  basic  materials  or  re-processing  redundant 
equipment in other ways.  
 
Dry  cells  and  rechargeable  batteries  must  be  removed  from  the  device  and  taken 
separately to the appropriate battery disposal centre. 
 
If you don’t know the location of your nearest disposal centre, please enquire at your 
local council office. 
 
 

Summary of Contents for 9545

















Reviews: