GRASS VALLEY T2 Elite Service Manual Download Page 96

Page: 96 / 143

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual

May 16, 2016

Chapter 4 Removing and Replacing FRUs

4. Remove the HDD (or SSD) from the HDD (or SSD) unit.

(1) Check the drive number of the HDD (or SSD) and remove two screws (with

springs and large washers).

• Drive numbers for the T2 Pro 2/Pro are “1”, “2”, “3”, and “4” from the top. (For

the T2 Elite 2/Elite and the T2 Express 2/Express, “1” and “2” from the top.)

The following illustration describes the procedure of the HDD in the drive

number “1”. The procedure for removing other drives is the same.

(2) Remove the HDD (or SSD) from the HDD (or SSD) unit.

5. Remove the HDD (or SSD) from the storage mount frame.

(1) Remove four round screws.
(2) Remove the HDD (or SSD) from the storage mount frame.

(2)

(1)

(2)

(1)

Summary of Contents for T2 Elite
















































































































































Search results

Summary of Contents for T2 Elite

Reviews:

GRASS VALLEY T2 Elite, Service Manual, Page: 96 / 143

Search results

Summary of Contents for T2 Elite

Reviews: