May 16, 2016
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual
67
Restoring to the factory default condition
5. When the message "Are you sure you want to restore?" appears, press the [y] key
and then press the [Enter] key on the keyboard.
• The write-back process of the recovery image is performed. This process will
take a while.
• When the write-back process of the recovery image is completed, T2 will be
restarted a few times.
6. When you see the message "Press any key to continue...", confirm the drive
structure is the following.
7. Press any key on the keyboard and restart the T2.
• The T2 will restart in the maintenance mode.
• If you want to start up the T2 system in the normal mode, switch to the normal
mode after starting up the maintenance mode. For detailed instructions, refer to
"Restarting from the maintenance mode to the normal mode" on page 28
.
NOTE: It is recommended to initialize the data after the recovery is completed. For
detailed instructions, refer to
"Initializing the data" on page 36
.
NOTE: Media files in the data drive (V: drive) cannot be used as they are even after
the recovery is completed. Copy the media files to the external storage device, and
then import them using the CommandCenter. For detailed instructions, refer to the
T2 User Manual.