manualshive.com logo in svg

GRASS VALLEY T2 Elite, Service Manual, Page: 40 / 143

Share
Download
GRASS VALLEY T2 Elite Service Manual Download Page 40

40

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual

May 16, 2016

Chapter 2   Maintenance Procedures

• "Backup timestamp" shows the backup date.

• Among the items under "Restore Targets", any item(s) that exist in the same 

folder where the XML file is located will be checked.

4. Make sure that the data you want to restore are checked under "Restore Targets".

• Uncheck any item that does not need to be restored.

5. Click 

Restore

.

6. Click 

Yes

 when the confirmation message is displayed.

• The restore begins.

7. When you see the completion message, click 

OK

.

8. Click 

Close

.

• "Data Restore" screen is closed.

System related maintenance

Acquiring the system information

You can acquire the system information of the Windows OS (such as the hardware 

information, components, and software environment) and save it in text format.

1. In the Maintenance Tools main screen, click the 

System

 tab.

Summary of Contents for T2 Elite
















































































































































Reviews:

No comments