manualshive.com logo in svg

GRASS VALLEY T2 Elite, Service Manual, Page: 23 / 143

Share
Download
GRASS VALLEY T2 Elite Service Manual Download Page 23

May 16, 2016

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual

23

Status indicators

Status indicators

The following sections describe the visual indicators that communicate the current 

operating status and system health of the T2. 

Power LED

The Power LED indicates status as follows:

WARNING: The power switch does not turn off power to the system. To turn power 

off, the system must be disconnected from the power source.

LAN port indicator codes

The RJ-45 LAN port includes integrated status LEDs. The LEDs oriented as follows:

The meanings of the LED states are described in the following table:

If the LAN is faulty, you must replace the motherboard.

LED behavior

Status Condition

Off

The power is set to Off and the T2 is not operational.

Green steady on

The power is set to On and the T2 is operational.

LED

Color

LED state

Status Condition

Left

Green

Off

LAN link is not established.

On

LAN link is established.

Flashing

The computer is communicating with 
another computer on the LAN.

Right

Green

Off

10 Mbit/sec data rate is selected.

On

100 Mbit/sec data rate is selected.

Orange

On

1000 Mbit/sec data rate is selected.

!

Green LED

Green/Orange LED

Summary of Contents for T2 Elite
















































































































































Reviews:

No comments