GRASS VALLEY M-122A User Manual Download Page 212

Page: 212 / 324

212

M-Series User Manual

20 April 2005

Chapter 8 Working With Playlists

Managing sections in the list

A list has as least one section, and all events belong to a section. Sections management
tasks include the following:

•

“Adding and removing sections” on page 212

•

“Renaming sections” on page 213

•

“Selecting the section end properties” on page 213

•

“Adding pause at the end of all section events” on page 214

•

“Removing pause at the end of all section events” on page 215

Adding and removing sections

A playlist has as least one section, but can have up to 100. All events belong to a
section, and each section can have up to 1000 events.

To add a section:

• In List view, select the context menu button

, then choose the

Add Section.

The

new section is inserted at the end of the list.

• Use the

Edit

menu in the AppCenter toolbar or standard keyboard shortcuts to

Copy

Cut

, or

Paste

a section. When you paste the section, it is inserted after the

currently selected section. NOTE: You can paste a section that you copied from a
list running on the other play channel.

To remove a section, perform one of the following:

• Select the section in the list, then select the context menu button

, and choose

Remove

, or

• Use the

Edit

menu in the AppCenter toolbar or standard keyboard shortcuts to

Cut

a section.

• Select the section in List view, then select the

Remove

button in the List view

toolbar. This button only appears in full screen viewing mode.

Summary of Contents for M-122A





































































































































































































































































































































Search results

Summary of Contents for M-122A

Reviews:

Brands by name

Popular brands

GRASS VALLEY M-122A, User Manual

Search results

Summary of Contents for M-122A

Reviews:

Brands by name

Popular brands