GRASS VALLEY M-122A User Manual Download Page 147

Page: 147 / 324

20 April 2005

M-Series User Manual

147

To start continuous record:

3. To change continuous record length, select

Length

in the Recorder pane.

The Length dialog box appears.

4. Using the onscreen keypad or external keyboard, enter the clip length by typing

only numbers, colons are added automatically.

5. Choose

in the dialog box, or

Enter

on the external keyboard.

6. Select the record button on the front panel

, or use the onscreen transport

controls .

Recording continues until

Stop

is selected. While recording, the mark in and mark

out update with the current status of the clip. The Time Dome gives a visual
indication record progress.

7. Load and play the clip in Player using one of the following steps:

• In the Recorder pane, select the

Preview

button, or

• In the

Monitor pane

, select the Record Channel tab, then drag and drop from the

Record Channel monitor to the Play Channel monitor.

The play channel becomes the active channel, and the clip is cued and ready for
play.

Summary of Contents for M-122A





































































































































































































































































































































Search results

Summary of Contents for M-122A

Reviews:

Brands by name

Popular brands

GRASS VALLEY M-122A, User Manual

Search results

Summary of Contents for M-122A

Reviews:

Brands by name

Popular brands