5-16
5.5 Replacing the Roll Paper Cutter
The roll paper cutter is used to automatically cut across the roll paper after printing has
been completed, and also to cut the roll paper at any desired time.
If the roll paper is not cut cleanly, replace the roll paper cutter.
CAUTION
• When replacing the roll paper cutter, take care not to cut your fingers or other
parts of your body on the roll paper cutter blade.
• When replacing the roll paper cutter, do
not touch any of the internal components
in the printer other than the cutter holder.
Take care not to cut yourself
on the blade inside the cutter.
Roll paper cutter
Note: The roll paper cutter is a consumable item.
IMPORTANT
• Be sure to use the Graphtec roll paper cutter (Part no. CT03U) that has been
specifically designed for use with the JW220 printer.
• When replacing the roll paper cutter, do not touch any of the internal compo-
nents in the printer other than the cutter holder.
• Do not wipe the surface of the roll paper cutter blade with a cloth or similar
item, or dip the blade in water or other fluids.
• Do not disassemble or modify the roll paper cutter.
• When replacing the roll paper cutter, make sure that the printer is in the power-
off status.
Replacing the roll paper cutter
1. Press the [POWER] button to turn off the printer.
Check that the [POWER] button LED is extinguished.
DATA
CAUTION
CANCEL
FORWARD
REVERSE
PAPER CUT
ERROR
OFF
