vii
Be sure to ground the earth terminal.
• If the cutting plotter is not grounded, the operator
could suffer an electrical shock in case of current
leakage.
• Denmark
Vigtigt ! Lederen med grøn/gul isolation må kun tilsluttes en
klemme mærket (IEC 417, No. 5019) eller (IEC 417, No. 5017).
• Norway
Apparatet må tilkoples jordet stikkontakt.
• Sweden
Apparaten skall anslutas till jordat uttag.
• Finland
Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
Handling Precautions
WARNING
Do not disassemble or modify the printer.
• Such actions may result in a fire hazard or electric
shock.
If the printer makes an unusual noise, gener-
ates smoke, overheats, emits a strange odor,
or otherwise functions abnormally, immedi-
ately turn off the power, remove the plug from
the power outlet, and either contact the store
where you purchased your printer or your
nearest Graphtec representative.
• Use of the printer in such a condition may result in a
fire hazard or electric shock.
Do not use flammable aerosols or similar
products in the vicinity of the printer.
• The gas contained in the spray may cause a fire
hazard or electric shock if it comes into contact with
the printer's internal electrical components.
Ground the inkjet printer
