15
308611
Operation
Prepare the RoadLazer for Transport
CAUTION
Never transport the RoadLazer while the paint gun
ball valves are open, the system is under pressure,
and the engine is running, as this could cause dam-
age to components.
1. Unlock all three red-handle clamps (A) on main
beam.
2. Lift spray gun arm (C) up from ground, and push in
to center of RoadLazer. See Fig. 9.
3. Pull gun arm hitch pin (D) out of frame.
4. Push spray gun arm in to frame.
5. Put gun arm hitch pin back in frame, and secure
with clip (E).
6. Center main beam on RoadLazer.
7. Lock three red-handle clamps (A) on main beam
(B). See Fig. 9.
WARNING
FIRE AND EXPLOSION HAZARD
Gasoline is extremely flammable and
explosive under certain conditions. Fuel
could spray from the fuel line connector
when it is disconnected from engine.
Fuel could come in contact with the hot
muffler and cause fire or explosion. To reduce the
risk of fire or explosion, always vent the fuel tank
and allow engine muffler to cool before you discon-
nect the fuel line.
8. After engine muffler has cooled, vent fuel tank (AB
on page 6), carefully disconnect fuel tank fuel line
from engine (U on page 6), and store securely.
06251A
Fig. 9
D
A
C
B
E
hydraulic pressure control knob
