80
Secure the batting and quilt top to the quilt-backing rail with
C-clamps
.
Insert the
bungee cord
into one of the holes in the top of a rail holder bracket. Pull the extra
cord through the hole until there is just enough for the clamp to reach your fabric. Pull the cable
down to hold its place in the rail holder bracket.
Slide the bungee stop back onto the end of the bungee cord.
14
15
16
Task 10 - Attaching the Fabric (continued)
C-Clamps
Part Four
Bungee Stop
Remove the bungee stop from one of the bungee clamps by pressing on the button and sliding it
off the end of the bungee cord.
Summary of Contents for Q-Zone Queen
