Grace Company Q-Zone Queen Page 10 Assembly Instructions Manual Download

Page: 10 / 84

We are pleased to introduce you to the newest part of your quilting setup. This frame has been

especially designed to help quilters like you have the tools available to create quality projects.

This manual is broken into four sections (or parts). Notifications at the end each of each section will

direct you to switch to your machine manual or QuiltMotion manual for instructions on assembling

those products. This creates a streamlined process of building a complete quilting setup in the most

efficient way. Use the following flowchart to guide you in navigating multiple manuals. If you are not

using one of the products in the flowchart, just move to the next item in the chart.

Thank you again for choosing us to help your quilting projects. We look forward to working with you.

- The Grace Company

Start Here: Frame Manual: Part One

• Assemble the frame’s legs, table, and sides.
• Install the channel lock onto the bottom

carriage.

• Align your tracks.

Quilting Machine Manual: Part One

• Install the lower encoder onto the bottom

carriage.

QuiltMotion Manual: Part One

• Prepare the bottom carriage.
• Install the long belt across the frame.

Quilting Machine Manual: Part Two

• Install your machine’s wheels.
• Align your wheels.

QuiltMotion Manual: Part Two

• Install the short belt.
• Tension the short belt.

Welcome to Your Q-Zone Queen Frame

Summary of Contents for Q-Zone Queen





















































































Search results

Summary of Contents for Q-Zone Queen

Reviews:

Related manuals for Q-Zone Queen

Brands by name

Popular brands

Grace Company Q-Zone Queen, Assembly Instructions Manual

Search results

Summary of Contents for Q-Zone Queen

Reviews:

Related manuals for Q-Zone Queen

Brands by name

Popular brands