17
EN
In a heat pump system, a larger quantity of hot water is mixed with cold water, as the volume
is larger and the temperature is lower (contributing to lower costs) than in the traditional
system, where the water volume is 2-3 times smaller.
7.3 SETTING
THE
FIXED
TEMPERATURE
OF
HEATING
CIRCUIT
This quick setting is available only when one or both heating circuits are used without heating
curves.
7.3.1 SETTING THE FIXED TEMPERATURE FOR THE FIRST HEATING CIRCUIT
By pressing on the temperature below the line, beside the sun symbol, an additional window
will appear.
With buttons ˝
+
˝ or ˝
–
˝ the fixed temperature for the first heating circuit can be changed for
the desired value.
Confirm the setting with button ˝
OK
˝.
7.3.2 SETTING THE FIXED TEMPERATURE FOR THE SECOND HEATING
CIRCUIT
By pressing on the temperature below the line, beside the sun symbol, an additional window
will appear. Press the arrow in the down right corner to access the setting for the second
heating circuit.
With buttons ˝
+
˝ or ˝
–
˝ the fixed temperature for the second heating circuit can be changed
for the desired value.
Confirm the setting with button ˝
OK
˝.
Summary of Contents for Aerogor POWER EVI Inverter 15 A
Page 2: ...EN...
