35
EN
9.9.2 Ambient Temp. To Start Cooling
Setting the activation/start of cooling at a certain ambient temperature.
The factory setting is 25 °C.
Example:
The set temperature to start cooling is 25 °C.
The heat pump will cool the facility depending on the set values if the ambient temperature
rises above 25 °C.
When the ambient temperature drops below 25 °C, the heat pump will automatically stop
cooling the facility.
It will resume cooling when the ambient temperature rises above 25 °C.
Note:
To prevent too frequent switches between operation and non-operation, the control unit
monitors the current temperature and temperature within a certain period and decides based
on this whether heating should be activated or blocked.
9.10 BACKUP
HEATING
In the “Backup Heating” menu you can set the backup heating sources. By factory default,
these heating sources are two-stage electric heaters that can be replaced with a different
heating source (pellet burning furnace, oil burning furnace etc.). In this case, the heat pump
regulates the switching on/off of the furnace.
Note:
Resetting the settings in the “Backup Heating” menu is only recommended upon consulting
with an authorised service person!
Summary of Contents for Aerogor POWER EVI Inverter 15 A
Page 2: ...EN...