Fig 63
Disable “Dial Special Number to Change Route”
Step 4: Disable # as the number end flag: (Figure 57)
Fig 64
Disable “Use # as number end flag
Step 5: Configure #57# dial plan. Because # is not used as the number end flag, the end flag
is according to the dial pan or waiting overtime. Therefore you should configure number often
used in the “DigitMap Table”. (Refer to Figure 58).
Fig 65
#57# dial plan configure
Step 6: configure #57# routing direction. Set #57# routing direction as “Register IP Route”.
(Figure 59)
