In H.323 protocol, this page is used to configure all ports phone number, H.323 ID.
If the “Registration Type” is set as “Register with Endpoint”, and the “Alias coding Mode”
is “E.164 + Port H323ID”, you should configure H.323 ID parameters in “Port Configuration”
page.
During configuration, please input related parameters in corresponding port and click
“submit”.
Port configuration support batch configuration, for example:
Please input the range in the “Range” of the first port such as 1-8, which means
batch configure 1-8 ports;
Please input port H.323 ID in the “H.323 ID” of the first port, such as 1678017;
Please input the phone number in the “Phone Number” of the first Port, such as
1678017; Click “Submit”, and system will do the batch configuration for 1-8 ports, and the
phone number increases, H.323 ID is the same with the first one.
If all ports are to be deleted, please click “delete all”, after click ok in the confirm box, all
ports setting should be deleted.
The modification of “H.323 ID” parameters nee reboot to take effect
5
5
.
.
3
3
.
.
2
2
.
.
2
2
S
S
I
I
P
P
协
协
协
协
协
协
协
协
议
议
议
议
议
议
议
议
Fig 19
SIP port setting
