Please refer to Section 6.4.2.
Busy tone
When you select “other” in “Countyry and District”, you
can define the format of busy tone.
l
And please pay attention to the format requirements.
Please refer to Section 6.4.2.
(450@-15+0@0,1000/400
0);
(0@0+0@0,0/0);
(0@0+0@0,0/0)
Ring
back
tone
When you select “other” in “Countyry and District”, you
can define the format of ringback tone.
l
And please pay attention to the format requirements.
Please refer to Section 6.4.2.
(450@-15+0@0,350/350);
(0@0+0@0,0/0);
(0@0+0@0,0/0)
Unobtainabl
e tone
When you select “other” in “Countyry and District”, you
can define the format of unobtainable tone.
l
And please pay attention to the format requirements.
Please refer to Section 6.4.2.
(450@-15+0@0,100/100);
(450@-15+0@0,100/100);
(450@-15+0@0,100/100)
Detection
Type
Set detection type:
- One tone detecting use lower FFT
One or two tone detecting use higher FFT
- One tone detecting use lower FFT
- Detect on band edges
One or two tone detecting
use higher FFT
Noise
Estimation
Control
Set the parameters of noise estimation control:
- After removing one tone
After removing two tones
- After removing three tones
After removing two tones
Cadence
Cycles
Set the detecting cadence:
- Verify one on time only
- Verify one on –off cadence
- Verify 2 on –off cadence
- Verify 3 on –off cadence
Verify one on –off cadence
Detect
Delay Time
Set the delay time from detection signal start.The range
is 10 ~ 500s
300
Drop Delay
Time
Set the delay time after the end of detecting signal.The
range is 10 ~ 80ms
40
Fig 25
VOICE
PARAMETERS
DESCRIPTION
5
5
.
.
4
4
.
.
4
4
S
S
u
u
p
p
p
p
l
l
y
y
m
m
e
e
n
n
t
t
s
s
e
e
r
r
v
v
i
i
c
c
e
e
Figure3
