GNATUS Endus Duo R, Owner'S Manual

Page: 55 / 68

55
M3
padrão
“VDW”
Function (M3/M4) Reciprocating Movement
M3/M4:
With this function enabled by pressing the
command pedal (a) or the button (b) at the
own handpiece, the motor will spin propelling
the instrument in a cutting direction (reverse
spinning) and afterwards the movement is
inverted to release the instrument (forward
spinning).
a b
RECIPROC
M4
padrão
“DENTSPLY”
RECIPROC
350
300
The Endus Duo R micromotor allows the programming of up to 9 stages for the rotatory
instrumentation on the M2 mode.
- Press the MODE key to select the operacional mode and PROGRAM to choose between
one of the pre-defined programmings, which will be saved for the other modes.
To adjust the values choose the M2 mode.
The torque value and the number of the programming will blink one after the other,
press SET to select the next option and, at this moment press the “ ADJUST +” key or the
“ ADJUST -“ to choose the desired value. Three (3) seconds after the last key has been
pressed, the numeric value will be saved. Then, press the SET key
Programming of the Operative Sequence (M2)
EQUIPMENT OPERATION
Reverse spinning
Forward spinning
M3
“VDW”
standard
M4
“DENTSPLY”
standard