GNATUS Endus Duo R, Owner'S Manual

Page: 50 / 68

50
INSTALLATION OF THE EQUIPMENT
05
- Place the handpiece,
correctly connected, at rest
on the support of the main
unit (fig.06) or over the
detached support provided
with the equipment.
04
02
- Connect the pedal on
the rear part of the main
unit (fig.04).
- Connect the micromotor
cable at the main unit
(fig.05).
- Couple the counter-angle
to the micromotor.
- Connect the measurement
cable to the main unit (fig.02).
06
ATTENTION
Always hold by the connectors to connect or disconnect the cables.
Configuring for the MODE M1 – Apex Locator
Configuring for the M2/M3/M4 MODE- Micromotor
03
A
A
03
- Connect the labial clip (A) and file support (B) to the
measurement cable (fig.03).
B