GNATUS Endus Duo R, Owner'S Manual

Page: 60 / 68

60
Precautions and warnings “after” the use of the equipment
Precautions and warnings during the “cleaning and disinfection”
of the equipment
- Turn off the main switch of the dental set when it is not in use for an extended period of time.
- Always maintain the equipment clean for the next operation.
- Do not modify any part of the equipment. Do not disconnect the cable or other connections
without need.
- If you are not going to use the equipment for an extended period of time, we recommend
you that the battery is removed in order to avoid fluid leakage. Please contact your Gnatus
representative.
- Avoid spilling water or other liquids inside the equipment which could cause short-
circuits.
- Do not use microabrasive material or steel wool during cleaning, do not use organic
solvents or detergents which contain solvents such as ether, stain removers, etc.
- For the cleaning of the LCD Display use a soft and dry cloth.
- Do not sterilize other than in autoclave (humid vapor), the parts suitable for this process
are: Counter-angle, labial clip and file support.
- Remove the file before using the autoclave with the counter-angle.
Gnatus shall not be responsible for:
- Use of the equipment for other purposes that are not specified in the instructions of use
and maintenance.
- Modifications or reparations executed by personnel non-authorized by the manufacturer.
- Use of non-original parts or parts different from those specified.
- Fractures of files due to bad use.
- Malfunction in the equipment or its accessories due to inadequate cleaning.
WARNING
The equipment is not indicated for patients and dentist-surgeons bearers of a cardiac
pacemaker.
- Before changing the counter-angle or file, turn the equipment off. The substitution
with the equipment ON may determine an undesired spinning by accidental touch on the
Start/Stop button.
- Always clean the base of the file to be installed. The entry of dirtiness on the mandril
might provoke the loss of concentricity and deterioration in its force.
- Never use the equipment if the power indicator of the batteries is blinking. It’ll not
work properly if the batteries are worn out.
- If you find a leakage of fluid in the battery, deformation of the casing of the motorized
handpiece or its partial discoloration, immediately interrupt its use and contact your Gnatus
representative.
- Always hold the connector for connecting and disconnecting cables.
- After coupling the counter-angle to the micromotor, pull it lightly to confirm that it is
correctly fastened.
- Use the reverse spinning mode carefully. Since this mode was designed to free the
fastened files, its spinning is fast and powerful, being able to break the file easily.
PRECAUTIONS, RESTRICTIONS AND WARNINGS