GNATUS Endus Duo R, Owner'S Manual

Page: 49 / 68

49
Product symbols
START/STOP.
Pedal connection.
Pre-programmed modes Key. Operation mode Key.
Reverse mode Key (changes
the micromotor direction of
spinning).
Direction of spinning indicator.
Personalized configuration key.
Battery charger connection.
Adjustment Key (lesser).
Adjustment Key (higher).
Torque intensity scale.
Micromotor connection. Apex locator connection.
INSTALLATION OF THE EQUIPMENT
The installation procedure is simple. Follow the steps below to correctly install the product.
- Position the equipment on a firm and leveled place.
- Connect the plug of the battery charger in the main
unit – only for recharge (fig.01).
The battery comes already installed, even though it needs
an initial charge.
Main unit
01
NOTE
Charge the battery for 08 hours before using the
equipment for the first time.
- Leave the battery charging for at least 4 hours.
TECHNICAL SPECIFICATIONS