20
OPERATION
Reversion of voltage
For your safety, Syncru GLX Dental Chair leaves the plant with a feed tension adjusted in 220V~,
therefore, be sure that your electrical net is compatible before connecting it. In case the tension is
127V~, please inert the position as per the procedure below.
Poisitioned in
220V~
Poisitioned in
127V~
1 -
Desconnect the general key of the chair.
2 -
Remove the finishing cover of the motor.
3 - Localize the Electronic Board, removing the protective cover .
4 -
Put the Jumper (33) accoring to the voltage of the local electric net (127V~ - 220V~)
5 -
After doing the operation, assembly the covers and turn-on again the equipment to the electrical
net.
33
ATTENTION:
Do not do the voltage inversion with the equipment turned-on.
