English
17
TECHNICAL SPECIFICATIONS
•
Product classification:
According to norm NBR IEC
60601-1
•
Supply voltage
127/220 V~ (manual selection)
•
Frequency
50/60 Hz
•
Electric shock protection
type:
Class one equipment.
•
Degree of protection
against electric shock:
B type
•
Operation way
Continuous with intermittent
load: T-on 1min. - T-off 4min.
•
Water leak protection
IPX0 – All the chair,
excepting foot control
IPX1 – foot control
• Power
See table above
•
Protection fuses
F1 e F2 ...........8A - Time-lag
•
Rising capacity
200 Kg
• Delivery unit tray’s maximum
load capacity
Syncrus line H - 1 Kg
Sincrus lines GL and L - 2 Kg
•
Net Weight
115 Kg
•
Gross Weight
154 Kg
FREQUENCY
CONSUMPTION
NOMINAL TENSION
POWER
127V~
220V~
220V~
60Hz
60Hz
50Hz
4,2A
2,4A
2,4A
530VA
530VA
530VA
Special providence or particular conditions for installation
- Check the electric net, it must be compatible with the specified one in the equipment.
- Verify the thread earth, it must be turned off correctly.
- Verify the general key of the equipment in the position “0”.
OBS:
These information also make part of the Manual of Installation and Maintenance of the equipment
that can be found with the authorized Gnatus technician.
Transport and storage conditions
The equipment must be transported and stored with the following observations:
- Carefully, should not suffer drop and neither receive impact.
- With the side of the arrow upward.
- With humidity protection, not to expose to rains, sparkling of water or humidified floor.
- With temperatures from -12ºC to 50ºC.
- With maximum piling up of 04 units for storage (DENTAL CHAIR).
- With maximum piling up of 07 units for storage (UPHOLSTERY).
Standards
This equipment was designed, manufactured and tested in compliance with the following standards:
NBR-IEC série 601-1 Equipamento Eletromédico - Parte 1: Prescrições gerais para segurança;
NBR ISO 6875:1998 - Equipamento odontológico – Cadeira odontológica de paciente;
EN 980:2003 (Ed. 2) - Graphical symbols for use in the labelling of medical devices;
ISO 14971 - Medical devices - application of risk management medical devices;
ISO 9687: 1993 - Dental equipment - graphical symbols;
ISO 13485-2 - Quality systems - medical devices;
ISO 780 - Packaging - pictorial marking for handling goods.
• Electromagnetic compatibility
This product was tested and approved in compliance with the following standards:
EN 60601-1 (1990);
Amendment 1 EN 60601-1 (1992);
Amendment 2 EN 60601-1 (1995);
Amendment13 EN 60601-1 (1995);
EN 60601-1-2 (2001);
NBR IEC 601-1 (1994);
Emenda 1 NBR IEC 601-1
(1994);
NBR IEC 601-1-2 (1997);
CISPR 11, edição 3.1 (1999);
IEC 61000-4-2 (1999);
IEC 61000-4-3 (1998);
IEC 61000-4-4 (1995);
IEC 61000-4-5 (1995);
IEC 61000-4-6 (1996);
IEC 61000-4-11 (1996);
