English
21
Foot control operation
OPERATION
16 - Work position 1.
17 - Work position 2.
18 - Last position / Spitting
position.
19 - Initial position.
20 - Dental light operation
(Low intensity).
21 - Emergency stop.
22 - Dental light operation
(High intensity).
23 - Lift backrest.
24 - Lower backrest.
25 - Lift seat.
26 - Lower seat.
34 - Emergency Led.
Warning:
When the key “Last position/
Spitting position” (18) is pressed,
the dental light will go off (if it was
on), the bowl will drain (for the
preset time, and if it was not
programmed yet, for four minutes)
and the backrest will go up to the
spitting position. When pressed
again, the backrest will return to
the last position and the dental light
will go on (if it was on).
When the key “Initial position”
(19) is pressed, the dental light will
go off (if it was on), the bowl will drain (for the preset time, and if it was not programmed yet, for four minutes)
and the backrest will go up and the set will go down.
To switch the dental light on, press the key (20) or (22), according to desired intensity, to change
intensity just press the other key. To switch it off, press the key again.
After pressing the “Inital position” (19) key or the “Last position/Spitting position” (18) key, any other
operation will trigger the “Stop”, and automatically the backrest current position will be defined al “Last
position”.
When the “Emergency stop” (21) key is pressed, the LED (34) will be on and all chair movements are
interrupted until pressed again. This operation does not erase previously recorded positions and
programming. We recommend its use during long surgical procedures, because all chair movements are
blocked, thus preventing unexpected movements.
The Syncrus chair features two programmable working positions. Just move the chair to the desired
position and press the button “1” (16) or “2” (17) for 3 seconds (you’ll hear a long beep).
18
19
20
24
23
22
26
25
24
23
20
16
17
18
19
22
21
16
26
17
25
21
34
34
Right-handed
Left-handed
