background image

4

GB

Original Instructions

Thank you for purchasing this GMC tool. This manual contains information necessary for 

safe and effective operation of this product. This product has unique features and, even if 

you are familiar with similar products, it is necessary to read this manual carefully to ensure 

you fully understand the instructions. Ensure all users of the tool read and fully understand 

this manual.

Guarantee

To register your guarantee visit our web site at  

www.gmctools.com and enter your details*.
Your details will be included on our mailing list (unless indicated otherwise) for information on 

future releases. Details provided will not be made available to any third party.

Battery Guarantee

GMC batteries are guaranteed for 6 months. If a defect occurs on a registered battery during 

the term of the Battery Guarantee, due to material or manufacturing fault, then GMC will 

replace it free of charge. This guarantee does not apply to commercial use nor does it extend 

to normal wear and tear or damage as a result of accident, abuse or misuse.

Purchase Record

Date of Purchase:
Model: 
GHT18V
Serial Number: 

                                                        (located on motor housing) 

Retain your receipt as proof of purchase.

If registered within 30 days of purchase GMC guarantees to the purchaser of this product that 

if any part proves to be defective due to faulty materials or workmanship within 24 MONTHS 

from the date of original purchase, GMC will repair or, at its discretion, replace the faulty part 

free of charge. This guarantee does not apply to commercial use nor does it extend to normal 

wear and tear or damage as a result of accident, abuse or misuse.

* Register online within 30 days of purchase.
Terms & conditions apply.
This does not affect your statutory rights.

Wear hearing protection  

Wear eye protection 

Wear breathing protection 

Wear head protection

Wear hand protection

Read instruction manual 

Wear protective clothing 

DO NOT use in rain or damp environments!

Indoors use only! (battery charger)

Do not touch the blades before the machine is disconnected from the supply 

and the blades have come to complete stop.

Class II construction (double insulated for additional protection)

DO NOT incinerate batteries!

Keep bystanders away!

Caution!

Conforms to relevant legislation and safety standards.

Environmental Protection 

Waste electrical products and batteries, including Li-Ion batteries, should not 

be disposed of with household waste. Please recycle where facilities exist. 

Check with your local authority or retailer for recycling advice.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about 

the product or instructions on its use.

842466_Z1MANPRO1.indd   4

23/06/2015   10:10

Summary of Contents for GHT18V





















































Reviews: