manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual

The GMC 2001 Yukon XL Owner's Manual is a must-have resource for all Yukon XL owners. This comprehensive manual provides detailed instructions and valuable information on operating and maintaining your vehicle. Download the manual for free from manualshive.com and unleash the full potential of your Yukon XL.

Share
Download
background image

6-19

Your engine air cleaner/filter is located in the
passenger’s side front corner of the engine compartment.
See “Engine Compartment Overview” in the Index for
more information on location.

1. To remove the air filter, loosen the screws on the cover.  

Then lift the cover upward and remove the filter from   
the engine air cleaner/filter housing. Care should be
taken to dislodge as little dirt as possible.

2. Clean the filter sealing surface and the filter housing.

3. Install the new filter.

4. Install the cover and tighten the screws on the air

cleaner cover.

Refer to the Maintenance Schedule to determine when to
replace the air filter. See “Owner Checks and Services”
in the Index.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2001 Yukon XL

Daihatsu Mira Manual preview
Mira
Brand: Daihatsu Pages: 340
GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
Oldsmobile 2004 Alero Quick Manual preview
2004 Alero
Brand: Oldsmobile Pages: 2
Mercedes-Benz 2016 SLK Operator'S Manual preview
2016 SLK
Brand: Mercedes-Benz Pages: 358
Webasto Telestart T91 Installation Instructions Manual preview
Telestart T91
Brand: Webasto Pages: 18
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Veldo Teknoloji DUCATO Manual preview
DUCATO
Brand: Veldo Teknoloji Pages: 32
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
Lincoln 2017 MKC Owner'S Manual preview
2017 MKC
Brand: Lincoln Pages: 538
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3
Perrycraft SportQuest Series Installation preview
SportQuest Series
Brand: Perrycraft Pages: 2
Prime Design VRI3-FT31B Assembly Manual preview
VRI3-FT31B
Brand: Prime Design Pages: 16
TERAFLEX 1365000 Manual preview
1365000
Brand: TERAFLEX Pages: 18
Westin 46-24025 Installation Instructions Manual preview
46-24025
Brand: Westin Pages: 9
Whispbar K601W Fitting Instructions Manual preview
K601W
Brand: Whispbar Pages: 15

Brands by name

Popular brands

Load more brands