manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual, Page: 164 / 419

Share
Download
GMC 2001 Yukon XL Owner'S Manual Download Page 164

2-86

The following situations can cause the transmission to
operate at higher temperatures:
D Towing a trailer
D Hot outside air temperatures
D Hauling a large or heavy load
D Low transmission fluid level
D High transmission fluid level
D Restricted air flow to the radiator and the auxiliary

transmission oil cooler (if equipped).

A temporary solution to hotter transmission operating
temperatures may be to let the transmission cool down.
If the transmission is operated at higher temperatures on
a frequent basis, see “Scheduled Maintenance” in the
Index for the proper transmission maintenance intervals.

Trans Hot...Idle Engine

Your vehicle has a transmission over

-

temperature

display contained in the message center.

If this warning message is
displayed, pull the vehicle
off the roadway when it is
safe to do so.

Set the parking brake and place the transmission in 
PARK (P). Idle the engine until the message center no
longer displays a message. If idling the engine does not turn
the warning message off after 10 to 15 minutes, contact
your nearest dealer or the GM Roadside Assistance Center.
See “Roadside Assistance” in the Index.

NOTICE:

If you keep driving your vehicle with the
transmission TRANS HOT...IDLE ENGINE
message displayed, you can damage the
transmission. This could lead to costly repairs
that may not be covered under your warranty.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments