manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual, Page: 292 / 419

Share
Download
GMC 2001 Yukon XL Owner'S Manual Download Page 292

5-25

Position the jack under the vehicle. If the flat tire 
is on the front of the vehicle, position the jack on 
the frame behind the flat tire where the frame
sections overlap.

On all 1500 series vehicles, use the jacking pad
provided on the rear axle. On 2500 series vehicles,
use the axle between the spring and shock.

If you have added a snow plow to the front of 
your vehicle, lower the snow plow fully before
raising the vehicle.

CAUTION:

Getting under a vehicle when it is jacked up is
dangerous. If the vehicle slips off the jack, you
could be badly injured or killed. Never get under
a vehicle when it is supported only by a jack.

CAUTION:

Raising your vehicle with the jack improperly
positioned can damage the vehicle and even 
make the vehicle fall. To help avoid personal
injury and vehicle damage, be sure to fit the 
jack lift head into the proper location before
raising the vehicle.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments