manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual

The GMC 2001 Yukon XL Owner's Manual is a must-have resource for all Yukon XL owners. This comprehensive manual provides detailed instructions and valuable information on operating and maintaining your vehicle. Download the manual for free from manualshive.com and unleash the full potential of your Yukon XL.

Share
Download
background image

4-44

Recreational Vehicle Towing

There may be times when you want to tow your vehicle
behind another vehicle for use at your destination. Be
sure to use the proper towing equipment designed for
recreational vehicle towing. Follow the instructions for
the towing equipment.

When towing your vehicle, turn the ignition to OFF. 
To prevent your battery from draining while towing,
remove the IGN 0 fuse from the instrument panel fuse
block. Be sure to reinstall the fuse when you reach 
your destination. See “Fuses and Circuit Breakers” 
in the Index.

Two-Wheel-Drive Vehicles

Two

-

wheel

-

drive vehicles, should not be towed 

with all four wheels on the ground. Two

-

wheel

-

drive

transmissions have no provisions for internal lubrication
while being towed. To properly tow these vehicles, 
they should be placed on a platform trailer with all 
four wheels off the ground.

In rare cases when it’s unavoidable that a two

-

wheel

-

drive

vehicle is to be towed with all four wheels on the ground,
the propeller shaft to axle yoke orientation should be
marked and the propeller shaft removed following the
applicable service manual removal/installation procedure.

Dust or dirt can enter the back of the transmission
through the opening created by removing the propeller
shaft if proper protection is not provided. Also, check
the transmission fluid level before driving the truck.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2001 Yukon XL

Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
Audiovox AA-BAT Programming Manual preview
AA-BAT
Brand: Audiovox Pages: 3
Victory 4x4 VRKCAP Install Instructions Manual preview
VRKCAP
Brand: Victory 4x4 Pages: 9
Jaeger 12020523 Fitting Instructions Manual preview
12020523
Brand: Jaeger Pages: 11
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
Honda 2006 Accord Owner'S Manual preview
2006 Accord
Brand: Honda Pages: 569
Xingyun XY40EV Service Manual preview
XY40EV
Brand: Xingyun Pages: 74
Honda 2007 Fit User Information preview
2007 Fit
Brand: Honda Pages: 24
Lincoln 2017 MKC Owner'S Manual preview
2017 MKC
Brand: Lincoln Pages: 538
Jacob Jensen Electronic Parking Disc 3 User Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 17
Waeco MagicWatch MW150 Installation And Operating Manual preview
MagicWatch MW150
Brand: Waeco Pages: 144
Brodit 810698 Installation Instructions preview
810698
Brand: Brodit Pages: 2
Kuda-Phonebase 296570 Installation Instruction preview
296570
Brand: Kuda-Phonebase Pages: 6
ACV 381094-36-1 Install Manual preview
381094-36-1
Brand: ACV Pages: 12

Brands by name

Popular brands

Load more brands