manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual

The GMC 2001 Yukon XL Owner's Manual is a must-have resource for all Yukon XL owners. This comprehensive manual provides detailed instructions and valuable information on operating and maintaining your vehicle. Download the manual for free from manualshive.com and unleash the full potential of your Yukon XL.

Share
Download
background image

2-41

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch off until you want to use
cruise control.

1. Move the cruise control switch to ON.

2. Get up to the speed you want.

3. Press in the SET button at the end of the lever and

release it.

4. Take your foot off the accelerator pedal.

United States

Canada

The CRUISE light on the instrument panel will
illuminate when the cruise control is engaged.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed and
then you apply the brake. This, of course, disengages the
cruise control. But you don’t need to reset it.

Once you’re going about 25 mph (40 km/h) or more, you can
move the cruise control switch from ON to R/A briefly.

You’ll go right back up to your chosen speed and stay there.

If you continue to hold the switch at R/A, the vehicle
will keep going faster until you release the switch or
apply the brake. So unless you want to go faster, 
don’t hold the switch at R/A.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2001 Yukon XL

Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
BrandMotion 1009-6503 Installation Instructions Manual preview
1009-6503
Brand: BrandMotion Pages: 8
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Whispbar K951W Fitting Instructions For Basic Carrier preview
K951W
Brand: Whispbar Pages: 15
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
Calix group TYP MVP 823 Assembly Instructions preview
TYP MVP 823
Brand: Calix group Pages: 4

Brands by name

Popular brands

Load more brands