manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual, Page: 221 / 419

Share
Download
GMC 2001 Yukon XL Owner'S Manual Download Page 221

4-18

3. Pull the push

-

pins and

lower air dam assembly
away from the retainers
until the lower air dam 
is free.

When you’re back on roads, though, be sure to replace
the air dam.

NOTICE:

Operating your vehicle for extended periods
without the front bumper lower air dam installed
can cause improper air flow to the engine and
may allow things like fog lamps or tow hooks on
the front of your vehicle to be damaged. Always
be sure to replace the front bumper air dam
when you’re finished off

-

road driving.

To reinstall the lower air dam:

1. Line up each push

-

pin

with its intended retainer
and push the washer
portion of the push

-

pin

towards the retainer until
it locks into place

2. Push the flat end of the

push

-

pin towards the

retainer until it locks
into place, making sure
each is secure.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments