manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual, Page: 166 / 419

Share
Download
GMC 2001 Yukon XL Owner'S Manual Download Page 166

2-88

Reduced Engine Power

This message is displayed
when the cooling system
temperature gets too hot and
the engine further enters 
the engine coolant
protection mode.

If your vehicle is equipped with the 8.1L engine, this
light may come on because of an electronic throttle
control system fault. See “Engine Overheating” in the
Index for further information.

Check Eng Oil Pressure

This message is displayed
when the engine oil pressure
is low.

See “Oil Pressure Gage” in the Index for more information.

Check Eng Oil Level

This message is displayed
when the engine oil level 
is low.

Once oil is added, it may need time to drain and settle in
the engine before this message will turn off. It is best to
let the engine cool down (if it is hot) or warm up (if it is
cold) and cycle the ignition to be sure this message turns
off. Refer to the dipstick for the correct level.

See “Engine Oil” in the Index on how to check the oil
level and for what type of oil to add.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments