GMC 2001 Yukon XL Owner'S Manual Download Page 265

Page: 265 / 419

4-62

Trailer Wiring Harness

Your vehicle is equipped with the following wiring
harnesses for towing a trailer.

Basic Trailer Wiring Package

The trailer wiring harness, with a seven

pin connector,

is located at the rear of the vehicle and is tied to the
vehicle’s frame. The harness connector can be plugged
into a seven

pin universal heavy

duty trailer connector

available through your dealer.

The seven

wire harness contains the following

trailer circuits:
D Yellow: Left Stop/Turn Signal
D Dark Green: Right Stop/Turn Signal
D Brown: Taillamps
D White: Ground
D Light Green: Back

up Lamps

D Red: Battery Feed
D Dark Blue: Trailer Brake
If you need to upgrade your vehicle to heavy

duty

trailering, a brake controller harness is available from
your dealer.

Summary of Contents for 2001 Yukon XL



































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Yukon XL

Reviews:

GMC 2001 Yukon XL, Owner'S Manual, Page: 265 / 419

Search results

Summary of Contents for 2001 Yukon XL

Reviews: