GMC 2001 Yukon XL Owner'S Manual Download Page 168

Page: 168 / 419

2-90

Low Washer Fluid

This message is displayed
when the vehicle is low on
windshield washer fluid.
The message is only
displayed for 15 seconds
each ignition cycle.

For more information, see “Windshield Washer Fluid” in
the Index.

Service Ride Control

This message is displayed
when a possible problem
exists with the Autoride

system if equipped.

For more information, see “Autoride

t” in the Index.

Cargo Door Ajar

This message is displayed
when the rear liftglass,
liftgate or panel doors are
ajar when the ignition is
in RUN.

Low Fuel

This message is displayed
when your vehicle is low
on fuel.

Refer to the fuel gage for a better indication of the
amount of fuel remaining in the fuel tank.

Summary of Contents for 2001 Yukon XL



































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Yukon XL

Reviews:

GMC 2001 Yukon XL, Owner'S Manual, Page: 168 / 419

Search results

Summary of Contents for 2001 Yukon XL

Reviews: