manualshive.com logo in svg

GMC 2001 Yukon XL, Owner'S Manual

The GMC 2001 Yukon XL Owner's Manual is a must-have resource for all Yukon XL owners. This comprehensive manual provides detailed instructions and valuable information on operating and maintaining your vehicle. Download the manual for free from manualshive.com and unleash the full potential of your Yukon XL.

Share
Download
background image

2-19

Engine Coolant Heater (If Equipped)

In very cold weather, 0

_F

(

-

18

_C) or colder, the

engine coolant heater can
help. You’ll get easier
starting and better fuel
economy during engine
warm

-

up. Usually, the

coolant heater should be
plugged in a minimum of
four hours prior to starting
your vehicle.

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical cord. The

cord is located on the driver’s side of the engine
compartment, near the power steering fluid reservoir.

3. Plug it into a normal, grounded 110

-

volt AC outlet.

CAUTION:

Plugging the cord into an ungrounded outlet
could cause an electrical shock. Also, the wrong
kind of extension cord could overheat and cause
a fire. You could be seriously injured. Plug the
cord into a properly grounded three

-

prong

110

-

volt AC outlet. If the cord won’t reach, 

use a heavy

-

duty three

-

prong extension cord

rated for at least 15 amps.

4. Before starting the engine, be sure to unplug and store

the cord as it was before to keep it away from moving
engine parts. If you don’t, it could be damaged.

How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of oil you have, and some other things. Instead of
trying to list everything here, we ask that you contact
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for that
particular area.

Summary of Contents for 2001 Yukon XL




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2001 Yukon XL

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
Cadillac 2009 CTS Personalization Manual preview
2009 CTS
Brand: Cadillac Pages: 20
Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Flash Cover MN019 Instructions preview
MN019
Brand: Flash Cover Pages: 2
Porsche WTY 2010 Warranty & Maintenance Manual preview
WTY 2010
Brand: Porsche Pages: 98
E&G Classics Black Ice Mesh Instruction Manual preview
Black Ice Mesh
Brand: E&G Classics Pages: 4
Volkswagen 1963 1500 Instruction Manual preview
1963 1500
Brand: Volkswagen Pages: 68
Pyle PLPSC8 User Manual preview
PLPSC8
Brand: Pyle Pages: 14
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
EZ-ON 100SMU Quick Start Manual preview
100SMU
Brand: EZ-ON Pages: 2
Adaptiv Mini CAM-MB6-AD User Manual preview
CAM-MB6-AD
Brand: Adaptiv Mini Pages: 4
Volvo XC60 2009 Owner'S Manual preview
XC60 2009
Brand: Volvo Pages: 304
AA Products RB0002 Instruction Manual preview
RB0002
Brand: AA Products Pages: 6

Brands by name

Popular brands

Load more brands