GLW MC 25, Operating Manual

Page: 58 / 131

TROUBLE-SHOOTING
20
10/12
3. Remove the cable

Pull the pin (1) upwards and pull out the end
sleeves (2).

Close the cover (3).

Connect mains cable (4).

Turn on (position I) the mc 25 with the mains
switch (5).

Press the reverse button (6) to move the mc 25
into start position.

Pull out the cable (7).
After mounting the tool insert and insertion of the
end sleeves the mc 25 is ready for operation.
4. Remove the cable

Press the reverse button (2) and pull the cable
(1) at the same time, the mc 25 moves into start
position.

Pull out the cable (3).

Remove the tool insert (4).

Remove end sleeve (5).
After mounting the tool insert the mc 25 is ready
for operation.
Diagram 25 Remove the cable
Diagram 26 Remove the cable