GLW MC 25, Operating Manual

Page: 51 / 131

OPERATION
10/12
13
4. Crimping cables

Insert the cable (1) straight into the funnel guide
until it stops.

Crimping and stripping works automatically.

Pull out the cable (2) straight when the mc 25
has stopped.
!
Refer to chapter faults when operating
faults or unsuccessful crimping
occurs.

Read counter (3) if required and set it to 0 with
the reset button (4).
5. Stop operation

Read counter (1) if required.

Turn off (position 0) the mc 25 with the mains
switch (2).
6. Daily maintenance
Disconnect the mains supply from the
mc 25 and open cover.

Turn off (position 0) the mc 25 with mains
switch (1).

Disconnect mains cable (2).

Slide the cover (3) back.

Remove (4) insulation scraps inside the mc 25.

Pull out the container (5).

Dispose insulation scraps and insert container.

Close the cover (6).

Connect mains cable (7).
Diagram 13 Crimping cables
Diagram 14 Stop operation
Diagram 15 Daily maintenance