GLW MC 25, Operating Manual

Page: 50 / 131

OPERATION
12
10/12
1. Prepare the cable

Before crimping cable must be aligned as
straight as possible.
2. Cut the cable

Cut the cable clean and straight.
!
Poor cut (Diagram 11) frequently
results in unsuccessful crimping.
3. Start the mc 25

Check that the cover (1) is closed.

Turn on (position I) the mc 25 with the mains
switch (2).

Check that counter (3) is at 0.
!
If the counter is not at 0 refer to
chapter faults.
Diagram 9 Prepare the cable
Diagram 10 Cutting cable
Diagram 11 Poor cut
Diagram 12 Start the mc 25