GLW MC 25, Operating Manual

Page: 52 / 131

RETOOLING
14
10/12
1. Prepare the retooling
Disconnect the mains supply from the
mc 25 and open cover.

Read counter if required.

Turn off the mc 25 with mains switch (1).

Disconnect mains cable (2).

Slide back the cover (3).

Pull the pin (4) upwards and pull out the end
sleeves (5).

Remove the dispenser (6) and roll up the
remaining end sleeves.

Fold back the dispenser holder (7).
2. Remove the tool insert

Pull out the bolt (1).

The tool insert (2) must be removed sideways.

Put the tool insert and the bolt into the
accessories box.
Diagram 16 Prepare the retooling
Diagram 17 Remove the tool insert