GLW MC 25, Operating Manual

Page: 45 / 131

DESCRIPTION
10/12
7
Standard components functions
1 Grip
For transport of the mc 25.
2 Funnel guide
The cable to be processed is inserted into the mc 25 through the funnel guide. Once it has been
inserted, work commences automatically.
3 Counter (000000 to 999999)
The counter counts the number of end-sleeves used.
The mc 25 performs automatically a reset to 0 at power-off.
4 Reset button
This button resets the counter to 0.
5 Tool insert (colour coded)
Positions the end sleeve and strips the cable.
The appropriate tool insert must be installed for every cross-section.
6 Bolt
Secures the tool insert.
7 Cover
Protects the user from moving parts inside the mc 25.
The mc 25 will only operate when the cover is properly closed.
8 End-sleeve feeder
The end-sleeve feeder positions the end sleeves. The appropriate end-sleeve feeder must be
installed for every cross-section.
9 Mains connection
The mains cable must be connected to the input connector.
10 Mains fuses
Fine wire fuses integrated into the mains connection.
11 Mains switch
Switches the power supply to the mc 25 on (position I) or off (position 0).