GLW MC 25, Operating Manual

Page: 48 / 131

COMMISSIONING
10
10/12
4. Fit the end-sleeve feeder
!
Verify that the tool insert is not
installed yet.

Slide the cover (1) back.

Insert the end-sleeve feeder (2) sideways and
place it on the bolts (3).
!
Check that the end-sleeve feeder has
clicked properly into place.
5. Mount the dispenser

Mount the dispenser (1) on the holder.
!
Check that the dispenser has clicked
properly into place.
6. Mount the tool insert

Take the tool insert with proper cross-section
and bolt from the accessories box.
!
Observe to the colour code of the tool
insert.

Mount the tool insert (1) sideways.

Fit the bolt (2) into the hole until it stops.
Diagram 5 Fit the end-sleeve feeder
Diagram 6 Mount the dispenser
Diagram 7 Mount the tool insert