Global Power Technologies
3-10
5120
3)
Check the battery voltage as follows:
a)
Measure the voltage between the brown lead and terminal 4 of TB-1. The voltage
should be greater than 2 volts.
b)
If the voltage is less than 2 volts the battery needs recharging or replacing.
c)
Make sure all wire connections are secure.
4)
Check the battery charger and spark generator as follows:
a)
Manually light the TEG by placing a lighted match at the port of the SI electrode.
b)
After twenty minutes of operation check the battery voltage as per step 3. The
voltage should be 2.35 volts.
c)
Perform step 1 again. If sparking does not occur the control module needs to be
replaced.
5)
Check if the battery will hold charge as follows:
a)
Remove the thin white/red wire from terminal 2 of TB-1.
b)
Connect the orange wire to the brown wire.
c)
Measure battery voltage between the orange wire and terminal 4 of TB-1.
d)
If the voltage is less than 2.0 volts, replace the battery.
e)
To replace the battery open the control module.
f)
Disconnect the battery leads.
g)
Install a new battery, taking note of polarity.
Figure 19
Spark Ignitor Wiring Diagram
Summary of Contents for 5060
